Journal of Prevention and Treatment for Stomatological Diseases ›› 2018, Vol. 26 ›› Issue (7): 409-414.doi: 10.12016/j.issn.2096-1456.2018.07.001

• Expert Forum •     Next Articles

Updated research on digitalization in aesthetic restoration

Lan LIAO(), Lijun ZENG   

  1. Department of Prosthodontics, Affiliated Stomatological Hospital of Nanchang University, Nanchang 330003, China
  • Received:2018-01-06 Revised:2018-05-10 Online:2018-07-20 Published:2018-08-30

RichHTML

17

PDF (PC)

135

Abstract:

With the development of digitalization, information and internet technology, digital dental aesthetic restoration technology is changing the traditional mode of treatment. The development of digital aesthetic restoration therapy is similar to the digital development track in other fields of medicine, in which the use of digital technology for intervention in particular treatment steps is evolving to digitalization throughout the treatment process. Digitalization improves the precision and quality of aesthetic restoration, increases the efficiency of clinical work and is favorable for patients. Digitalization could replace traditional methods, propelling aesthetic restoration into a fully digitalized era. Function, aesthetics and minimal invasiveness are the three major concepts of contemporary prosthodontics, and digital aesthetic restoration technology represents a perfect interpretation of these three concepts. This paper describes recently developed digital technologies for aesthetic restoration and cites the advantages, limitations, and developmental direction of digital restoration dentistry.

Key words: Digitalization, CAD/CAM, Aesthetic restoration, Aesthetic region, Data collection

CLC Number: 

  • R783.4

Figure 1

Stereolithography techonology"

[1] Bonnet G, Batisse C, Bessadet M, et al.A new digital denture procedure: a first practitioners appraisal[J]. BMC Oral Health, 2017, 17(1): 155.
[2] Richert R, Goujat A, Venet L, et al.Intraoral scanner technologies: a review to make a successful impression[J]. J Healthc Eng, 2017: 8427595.
[3] Joda T, Lenherr P, Dedem P, et al.Time efficiency, difficulty, and operator′s preference comparing digital and conventional implant impressions: a randomized controlled trial[J]. Clin Oral Implants Res, 2017, 28(10): 1318-1323.
[4] kim JE, AmelyaA, ShinY, et al. Accuracy of intraoral digital impressions using an artificial landmark[J]. J Prosthet Dent, 2017, 117(6): 755-761.
[5] Heike R, Salmen H, Moldan M, et al.Accuracy of intraoral and extraoral digital data acquisition for dental restorations[J]. J Appl Oral Sci, 2016, 24(1): 85-94.
[6] Gan N, Xiong Y, Jiao T.Accuracy of intraoral digital impressions for whole upper Jaws, including full dentitions and palatal soft tissues[J]. PLoS One, 2016, 11(7): e0158800.
[7] Zimmermann M, Mehl A, Mörmann WH, et al.Intraoral scanning systems - a current overview[J]. Int J Comput Dent, 2015, 18(2): 101-129.
[8] Clausner T, Dalal SS, Crespo-García M.Photogrammetry-based head digitization for rapid and accurate localization of EEG electrodes and MEG fiducial markers using a single digital SLR camera[J]. Front Neurosci, 2017, 11: 264.
[9] Cheung MY, Almukhtar A, Keeling A, et al.The accuracy of conformation of a generic surface mesh for the analysis of facial soft tissue changes[J]. PLoS One, 2016, 11(4): e0152381.
[10] Lanis A. Álvarez Del Canto O. The combination of digital surface scanners and cone beam computed tomography technology for guided implant surgery using 3Shape implant studio software: a case history report[J]. Int J Prosthodont, 2015, 28(2): 169-178.
[11] Zhao YJ, Xiong YX, Wang Y.Three-dimensional accuracy of facial scan for facial deformities in clinics: a new evaluation method for facial scanner accuracy[J]. PLoS One, 2017, 12(1): e0169402.
[12] Hassan B, Greven M, Wismeijer D.Integrating 3D facial scanning in a digital workflow to CAD/CAM design and fabricate complete dentures for immediate total mouth rehabilitation[J]. J Adv Prosthodont, 2017, 9(5): 381-386.
[13] Hassan B, Gonzalez B, Tahmaseb A, et al.A digital approach integrating facial scanning in a CAD-CAM workflow for complete-mouth implant-supported rehabilitationof patients with edentulism: a pilot clinical study[J]. J Prosthet Dent, 2017, 117(4): 486-492.
[14] Venkatesh E, Elluru SV.Cone beam computed tomography: basics and applications in dentistry[J]. J Istanb Univ Fac Dent, 2017, 51(3Suppl1): S102-S121.
[15] Burgess J.Digital DICOM in dentistry[J]. Open Dent J, 2015, 9: 330-336.
[16] Cardelli P, Turrini R, Bulletti A, et al.New online management software and DICOM viewer for dentistry[J]. Int J Comput Dent, 2011, 14(2): 147-153.
[17] Kim C, Baek SH, Lee T, et al.Efficient digitalization method for dental restorations using micro-CT Data[J]. Sci Rep, 2017, 7: 44577.
[18] 栾丽丽, 肖慧娟, 刘辉, 等. SurgiGuide数字化黏膜支持式导板全程引导牙种植术的精确度研究[J]. 口腔疾病防治, 2017, 25(9): 575-581.
[19] Mascha F, Winter K, Pietzka S, et al.Accuracy of computer-assisted mandibular reconstructions using patient-specific implants in combination with CAD/CAM fabricated transfer keys[J]. Craniomaxillofac Surg, 2017, 5(17): 1010-5182.
[20] Agarwal A, Seth K, Parmar S, et al.Dental videographic analysis using digital age media[J]. Int J Clin Pediatr Dent, 2016, 9(4): 355-363.
[21] Desai V, Bumb D.Digital dental photography: a contemporary revolution[J]. Int J Clin Pediatr Dent, 2013, 6(3): 193-196.
[22] Zanardi PR, Laia Rocha Zanardi R, ChaibStegun R, et al. The use of the digital smile design concept as an auxiliary tool in aesthetic rehabilitation: a case report[J]. Open Dent J, 2016, 10: 28-34.
[23] Cattoni F, Mastrangelo F, Gherlone EF, et al.A new total digital smile planning technique (3D-DSP) to fabricate CAD-CAM mockups for esthetic crowns and veneers[J]. Int J Dent,2016, 7: 1-5.
[24] Abduo J.Morphological symmetry of maxillary anterior teeth before and after prosthodontic planning: comparison between conventional and digital diagnostic wax-ups[J]. Med Princ Pract, 2016, 25(3): 276-281.
[25] Filius MAP, Kraeima J, Vissink A, et al.Three-dimensional computer-guided implant placement in oligodontia[J]. Int J Implant Dent, 2017, 3(1): 30.
[26] 胡文, 伍永昌, 陈俊兰, 等. 基于CT数据制作的上前牙种植个体化全瓷冠的应用[J]. 口腔疾病防治, 2017, 25(9): 582-585.
[27] Joda T, Brägger U.Time-efficiency analysis of the treatment with monolithic implant crowns in a digital workflow: a randomized controlled trial[J]. Clin Oral Implants Res, 2016, 27(11): 1401-1406.
[28] Koralakunte PR, Aljanakh M.The role of virtual articulator in prosthetic and restorative dentistry[J]. J Clin Diagn Res, 2014, 8(7): 25-28.
[29] Solaberrieta E, Otegi JR, Goicoechea N, et al.Comparison of a conventional and virtual occlusal record[J]. J Prosthet Dent, 2015, 114(1): 92-97.
[30] Ender A, Wiedhahn K, Mörmann WH.Chairside multi-unit restoration of a quadrant using the new Cerec 3D software[J]. Int J Comput Dent, 2003, 6(1): 89-94.
[31] Schweiger J, Beuer F, Stimmelmayr M, et al.Histo-anatomic 3D printing of dental structures[J]. Br Dent J, 2016, 221(9): 555-560.
[32] Kim SY, Shin YS, Jung HD, et al.Precision and trueness of dental models manufactured with different 3-dimensional printing techniques[J]. Am J Orthod Dentofacial Orthop, 2018, 153(1): 144-153.
[33] Batson ER, Cooper LF, Duqum I, et al.Clinical outcomes of three different crown systems with CAD/CAM technology[J]. J Prosthet Dent, 2014, 112(4): 770-777.
[34] 吴秦. 口腔种植机器人空间映射装置的研发及其应用研究[D]. 西安: 第四军医大学, 2016.
[1] HOU Jinsong,ZHANG Yadong. Difficulties and prevention and management of serious complications in surgical treatment of osteoradionecrosis of jaw [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(7): 409-416.
[2] LIU Ziyan,DAI Qun,XIAO Fang. Application of digital implant guide plate in oral implant restoration [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(5): 337-340.
[3] WU Kunji,KONG Weidong. Application of an individualized appliance in orthodontic treatment [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(2): 132-144.
[4] FENG Ermei,ZHANG Yanxia. Evaluation of the efficacy of CAD/CAM glass-ceramic onlays in molars with complicated oblique crown fracture [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(12): 775-778.
[5] HONG Yurui,ZHOU Hailan,GAO Yongbo. Clinical effect of resin hybrid ceramic onlay in repairing posterior tooth defects [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(1): 30-34.
[6] ZHONG Lidong,KONG Weidong. Factors related to the control of maxillary anterior teeth torque in invisible appliances [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(1): 56-60.
[7] Xin ZENG,Yu SONG,Yanling YU,Changyu CAI,Jing LIN. Clinical observations of all-ceramic restorations of children’s first permanent molars with severe defects [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(9): 578-583.
[8] Mengting TIAN, Lei ZHANG, Huiyu HE, Ningning LIU, Xiangzhen HAN, Lijuan DU. Effect of different hydrofluoric acid etching methods on the surface and adhesion strength of two ceramic inlays [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(8): 519-525.
[9] WU Buling,YAN Wenjuan. Clinical progress on restoration by chairside CAD/CAM inlay [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(12): 749-758.
[10] Shuyi TAN,Yifan CHEN. The functional and aesthetic reconstruction of tetracycline stained teeth with a virtual articulator in a CAD/CAM system [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(11): 727-734.
[11] Jie JIANG, Yan SITU, Juan ZHANG, Dongjian LI, Bolin Ren. A retrospective study on the clinical outcomes of all-ceramic crowns restoration fabricated by oral digital impression [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(1): 38-42.
[12] Changtao LI, Jing WU, Li GUAN, Ruiyong WANG. Clinical application of E-MAX glass ceramic onlays in the restorations of the nonvital posterior teeth [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(9): 600-604.
[13] Xiantao ZENG, Xinhui YAO, Hongwen LI, Xiaorui GENG. Influence of different cement spaces on marginal adaptation of CAD/CAM inlay [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(8): 530-532.
[14] Lei SHI, Sheng-Xing HUANG, Hui-Feng LIU, Hai-Peng SUN, Su TANG, Yong-Bo GAO. The immediate implant and immediate restoration in the anterior maxilla with the digital technique: case report and literature review [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(2): 119-122.
[15] Luman LIAO, Li XIONG, Wenbing HUA, Yun ZHANG, Weiping ZHANG, Xiuyin ZHANG. The immediate implant and delayed restoration in maxillary esthetic zone: A case report and literature review [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(12): 798-802.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] Hong-chang LAI,Jun-yu SHI. Maxillary sinus floor elevation[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(1): 8 -12 .
[2] Pin ZHOU, Yang-fei LI. MRI study of temporomandibular joint disc position in asymptomatic volunteers[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(4): 239 -244 .
[3] Xinxin XIA, Fang FANG, Lijuan CHENG. Shaping ability of Pathfile and WaveOne in simulated root canals[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(6): 365 -368 .
[4] Yuanhong LI, Xinyi FANG, Yu QIU, Lei CHENG. Experimental study on the effects of green tea on salivary flow rate and pH value[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(9): 560 -564 .
[5] Chengzhang LI. Masticatory muscles in occlusion[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(12): 755 -760 .
[6] . [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(1): 1 .
[7] Zhirong WU, Shiguang Huang. Research progress on the etiology, clinical examination and treatment of peri-implantitis[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(6): 401 -405 .
[8] Xiaowu YAO, Shisheng CHEN, Zizheng LU, Minxiao LIN. Clinical report and literature review on the amyloidosis of salivary glands[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(8): 533 -536 .
[9] Yu LU, Chengxia LIU, Zhongjun LIU. Role of TRAF6 in inflammatory responses of human osteoblast-like cells with Enterococcusfaecalis[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(7): 420 -425 .
[10] Fen CHEN, Linlin CHEN. Stafne bone cavity[J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(7): 464 -467 .

Copyright © Editorial Board of Journal of Prevention and Treatment for Stomatological Diseases

This work is licensed under a Creative Commons Attribution 3.0 License.

Address:Guangzhou City Jiangnan Road South 366, Editorial office ofJournal of Prevention and Treatment for Stomatological Diseases, zip code: 510280　Fax:020-34304115　E-mail：kqjbfz@vip.126.com

Supported by:Beijing Magtech

This work is licensed under a Creative Commons Attribution 3.0 License.