Journal of Prevention and Treatment for Stomatological Diseases ›› 2017, Vol. 25 ›› Issue (3): 196-199.doi: 10.12016/j.issn.2096-1456.2017.03.012

• Review Articles • Previous Articles     Next Articles

Research progress on the bonding strength of primary teeth after Er, Cr: YSGG laser irradiation

Yun LIANG1,2(), Ke CHEN2()   

  1. 1. School of Medicine, Jinan University, Guangzhou 510632, China
    2. Center of Dentistry, Guangzhou Women and Children Health Care Center, Guangzhou 510632, China
  • Received:2016-01-24 Revised:2016-04-07 Online:2017-03-20 Published:2018-09-03

Abstract:

With many advantages such as safety, effective cutting of enamel and dentin, Er, Cr: YSGG laser has gained more and more attention in recent years. After irradiation, the morphology, composition, and structure of tooth surface has changed, yet, the effect of these alterations to the bonding strength of the subsequent material is controversial. The paper has made a review from the following four aspects: Mechanism for tooth hard tissue cutting with Er, Cr: YSGG laser; The structure characteristics of primary teeth; The enamel bonding strength of primary teeth after Er, Cr: YSGG laser treatment; Safety, superiority and expectation for the application of Er, Cr: YSGG laser in primary teeth.

Key words: Er, Cr: YSGG laser, Enamel of primary teeth, Dentin of primary teeth, Bonding strength

CLC Number: 

  • RR788+.2
[1] Vergauwen TE, Michiels R, Torbeyns D, et al.Investigation of Coronal Leakage of Root Fillings after Smear Layer Removal with EDTA or Er, Cr: YSGG Laser through Capillary Flow Porometry[J]. Int J Dent, 2014, 2014: 593160.
[2] Malekafzali B, Fekrazad R, Mirfasihi A, et al.Comparison of microtensile bond strength of a resin composite to enamel conditioned by acid etching and Er, Cr: YSGG laser in human primary teeth[J]. Eur Arch Paediatr Dent, 2015, 16(1): 57-62.
[3] Kato C, Taira Y, Suzuki M, et al.Conditioning effects of cavities prepared with an Er, Cr: YSGG laser and an air-turbine[J]. Odontology, 2012, 100(2): 164-171.
[4] Al-Omari WM, Palamara JE.The effect of Nd: YAG and Er, Cr: YSGG lasers on the microhardness of human dentin[J]. Lasers Med Sci, 2013, 28(1): 151-156.
[5] Lee SY, Jung HI, Jung BY, et al.Desensitizing efficacy of nano-carbonate apatite dentifrice and Er, Cr: YSGG laser: a randomized clinical trial[J]. Photomed Laser Surg, 2015, 33(1): 9-14.
[6] Olivi G, Genovese M.Laser restorative dentistry in children and adolescents[J]. Eur Arch Paediatr Dent, 2011, 12(2): 68-78.
[7] Al-Batayneh OB, Seow WK, Walsh LJ.Assessment of Er: YAG laser for cavity preparation in primary and permanent teeth: a scanning electron microscopy and thermographic study[J]. Pediatr Dent, 2014, 36(3): 90-94.
[8] Guler C, Malkoc MA, Gorgen VA, et al.Effects of Er: YAG laser on mineral content of sound dentin in primary teeth[J]. ScientificWorld Journal, 2014, 2014: 578342.
[9] Kamburoglu K, Yetimoglu NO, Altan H.Characterization of primary and permanent teeth using terahertz spectroscopy[J]. Dento Maxillofac Radiol, 2014, 43(6): 20130404.
[10] Baygin O, Korkmaz FM, Arslan I.Effects of different types of adhesive systems on the microleakage of compomer restorations in Class V cavities prepared by Er, Cr: YSGG laser in primary teeth[J]. DENT MATER J, 2012, 31(2): 206-214.
[11] Oznurhan F, Olmez A.Morphological analysis of the resin-dentin interface in cavities prepared with Er, Cr: YSGG laser or bur in primary teeth[J]. Photomed Laser Surg, 2013, 31(8): 386-391.
[12] Malkoc MA, Tasdemir ST, Ozturk AN, et al.Effects of laser and acid etching and air abrasion on mineral content of dentin[J]. Lasers Med Sci, 2011, 26(1): 21-27.
[13] Oskoee PA, Kimyai S, Ebrahimi Chaharom ME, et al.Cervical margin integrity of Class II resin composite restorations in laser- and bur-prepared cavities using three different adhesive systems[J]. Oper Dent, 2012, 37(3): 316-323.
[14] Kilinc E, Roshkind DM, Antonson SA, et al.Thermal Safety of Er: YAG and Er, Cr: YSGG Lasers in Hard Tissue Removal[J]. Photomed Laser Surg, 2009, 27(4): 565-570.
[15] Ana PA, Velloso WF, Jr., Zezell DM. Three-dimensional finite element thermal analysis of dental tissues irradiated with Er, Cr: YSGG laser[J]. Rev Sci Instrum, 2008, 79(9): 093910.
[16] Sungurtekin-Ekci E, Oztas N.Microtensile bond strength of a resin-based fissure sealant to Er, Cr: YSGG laser-etched primary enamel[J]. Odontology, 2015.
[17] Masoumeh M, Leila E, Fekrazad R, et al.The effect of Er, CrYSGG laser and air abrasion on shear bond strength of a fissure sealant to enamel[J]. J Am Dent Assoc, 2010, 141(2): 157-161.
[18] Cafer T, Hesna S-Öl, Mahir G, et al. Shear bond strength of composite bonded with three adhesives to Er, CrYSGG laser-prepared enamel[J]. QUINTESSENCE INT, 2010, 41(6): 119-124.
[19] Garbui BU, de Azevedo CS, Zezell DM, et al. Er, Cr: YSGG laser dentine conditioning improves adhesion of a glass ionomer cement[J]. Photomed Laser Surg, 2013, 31(9): 453-460.
[20] George R, Walsh LJ.Thermal Effects from Modified Endodontic Laser Tips Used in the Apical Third of Root Canals with Erbium-Doped Yttrium Aluminium Garnet and Erbium, Chromium-DopedYttrium Scandium Gallium Garnet Lasers[J]. Photomed Laser Surg, 2010, 28(2): 161-165.
[21] Bahrololoomi Z, Heydari E.Assessment of Tooth Preparation via Er: YAG Laser and Bur on Microleakage of Dentin Adhesives[J]. J DENT, 2014, 11(2): 172-178.
[22] Dundar B, Guzel KG.An analysis of the shear strength of the bond between enamel and porcelain laminate veneers with different etching systems: acid and Er, Cr: YSGG laser separately and combined[J]. Lasers Med Sci, 2011, 26(6): 777-782.
[23] Ferreira LS, Apel C, Francci C, et al.Influence of etching time on bond strength in dentin irradiated with erbium lasers[J]. Lasers Med Sci, 2010, 25(6): 849-854.
[24] Oznurhan F, Olmez A.Nanoleakage in primary teeth prepared by laser irradiation or bur[J]. Lasers Med Sci, 2013, 28(4): 1099-1105.
[25] Rossi RR, Aranha AC, Eduardo Cde P, et al.Microleakage of Glass Ionomer Restoration in Cavities Prepared by Er, Cr: YSGG Laser Irradiation in Primary Teeth[J]. J Dent Child (Chic), 2007, 75(2): 151-157.
[26] Elif S, Nurhan Ö.The effect of erbium, chromium: yttrium-scandium-gallium-garnet laser etching on marginal integrity of a resin-based fissure sealant in primary teeth[J]. Laser Med Sci, 2010, 25(6): 841-847.
[27] Cehreli SB, Gungor HC, Karabulut E.Er, Cr: YSGG laser pretreatment of primary teeth for bonded fissure sealant application: a quantitative microleakage study[J]. J Adhes Dent, 2006, 8(6): 381-386.
[28] Shafiei F, Memarpour M, Fekrazad R.Sealing of silorane-based composite in laser-prepared primary teetheffect of acid etching[J]. Pediatr Dent, 2014, 36(5): 378-383.
[29] Ryu JJ, Yoo S, Kim KY, et al.Laser modulation of heat and capsaicin receptor TRPV1 leads to thermal antinociception[J]. J Dent Res, 2010, 89(12): 1455-1460.
[30] 郭晓钰, 陈慧芬, 司海燕, 等. 激光和脱敏剂治疗牙本质敏感症的临床疗效对比[J]. 广东牙病防治, 2014, 22(10): 515-519.
[1] Chang LIU,Yali LIU,Xia LI. Effect of root canal irrigants on the bond strength between resin sealants and dentin [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(6): 404-408.
[2] LI Shanshan,CHU Fuhang,MO Hongbing. Effect of dentin exposure on the shear bond strength of cast porcelain veneers [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2019, 27(2): 90-94.
[3] Yepo HOU, Renze SHEN, Luyuan CHEN, Yi CHEN, Yingtong JIANG, Jingmei LI, Jie GAO. The effect of Er: YAG laser irradiation on bonding properties of IPS e.max CAD ceramics [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2018, 26(2): 95-98.
[4] Zhen-xia LI, Ting-ting CHEN, Pei-lin LI, Jing XUE, Qiang ZHANG. Antibacterial effects and tensile bonding strength of orthodontic adhesive containing nanohydroxyapatite [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2017, 25(2): 93-96.
[5] Shi-yao LIN,Lang LIU,Jie-yin LI,Xiao-shan WEN,Xiu-hua YE,Jian-tao YE. The effect of heat treatment on bonding strength of ceramic to cast nickel-chromium-based alloys [J]. Journal of Prevention and Treatment for Stomatological Diseases, 2016, 24(6): 331-335.
[6] WU Lei, TAN Jun, PENG Tian-zhou, LI Lang, XIE Si-ming, DUAN Jian-min. Research progress of the biomechanical measurement method of the implant bone bonding strength [J]. Journal of Prevention and Treatment For Stomatological Diseases, 2016, 24(4): 254-256.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!
This work is licensed under a Creative Commons Attribution 3.0 License.